English Excellent sealing performance, waterproof and dustproof
1. Tight fit: It is made of highly elastic silicone material, which is soft and tough, and can accurately fill the fine gaps of the charging port. Even if it is an irregular interface, it can achieve a tight and seamless fit, effectively blocking the invasion of liquids, dust and foreign objects. The waterproof level can reach IP68, ensuring that electronic devices are in all kinds of harsh The environment is stable, such as using mobile phones in the rain and operating equipment in dusty workshops without worrying about damage to the charging port.
2. Long-lasting sealing: The silicone sealing cable has excellent anti-ageing performance. After long-term use, it can still maintain good elasticity and sealing effect. It will not lose its sealing ability due to multiple plugging and unplugging of the charging cable or long-term exposure to the air. The service life is 2-3 times that of ordinary sealing materials, which can provide long-term reliability for the equipment. Of protection.
Adapt to extreme environments, stable and reliable performance
1. High and low temperature resistance: It can work normally in the extreme temperature range of -40℃ to 200℃. Whether in the cold Arctic or in the hot desert environment, it will not harden, soften or deform due to temperature changes. It always maintains stable sealing performance and ensures the normal use of the charging port under different climatic conditions.
2. Chemical corrosion resistance: It has strong tolerance to common chemicals such as sweat, rainwater, alcohol, gasoline, etc., and will not be eroded, dissolved or chemically reacted by these substances. It ensures that when in contact with various chemicals, the sealing line can still play its proper protective role, extend the service life of the charging port, and reduce the Prepare for the risk of failure caused by corrosion.
The material is safe and environmentally friendly, and it is safe to use.
1. Food-grade silicone: Food-grade silicone material is selected, which is non-toxic, tasteless and pollution-free. Even if it is in long-term contact with the skin, it will not produce adverse reactions such as allergies. It meets strict environmental protection standards, such as RoHS, REACH, etc. It is friendly to the human body and the environment. It can be used in all kinds of electronic devices, especially children's smart hands. Watches, mobile phones for the elderly and other products that are close to the human body.
2. No precipitation of harmful substances: During normal use and high-temperature charging, no harmful substances will be precipitated, avoiding corrosion to the internal circuit of electronic equipment, and will not pollute the surrounding environment, providing users with a safe and healthy use experience.
Convenient and simple installation, widely applicable and universal
1. Plug and play: The design is exquisite, and the installation method is simple and convenient. No tools are required. Users only need to embed the sealed cable directly into the card slot on the edge of the charging port. It is easy to operate. Even ordinary users without professional knowledge can quickly complete the installation, saving time and effort.
2. Wide adaptability: With good universality, it can adapt to the charging ports of most mainstream electronic devices on the market, including different interface types such as Type-C, Micro USB, Lightning, etc. Whether it is mobile phones, tablets, Bluetooth headphones, or mobile power supplies, etc., you can find Match it with the appropriate sealing line.
FAQ:
I. The problem of sealing performance
1. Q: Does the sealing wire not work if the charging port is flooded with dust and water?
A: It is possible. First, check whether the sealing line is displaced, detached or damaged. These problems will damage the sealing structure and cause foreign matter to enter. If the appearance of the sealing line is normal, check whether the card slot at the charging port of the electronic product is deformed, which will affect the fit of the sealing line. If there is any deformation, it needs to be repaired.
2. Q: After replacing the new sealed cable, the charging port is still not waterproof. What is the reason?
A: It may be that the size of the sealing line does not match the card slot of the charging port. If it is too thin, it cannot fill the gap tightly, and if it is too thick, it cannot be installed normally. It is necessary to re-measure the size of the card slot and replace the sealed wire with the adapted specifications. It may also be that the sealing line is twisted and folded during installation, and reinstalled to ensure that it fits the card slot evenly.
II. Ageing and damage problems
1. Q: The sealing wire has become hard and cracked. Can it continue to be used?
A: Not. Hardening and cracking indicate that the sealing line has been ageing and damaged, and the sealing performance has been lost. Continued use will make the charging port lose protection, which is easy to cause internal circuit short circuit, corrosion and other failures. The new sealing line should be replaced in time.
2. Q: Why did the sealing wire get damaged after a short time of use?
A: Frequent plugging and unplugging of the charging cable will cause the sealing cable to be constantly rubbed and squeezed, accelerating wear; long-term exposure to high temperature and humid environment, or contact with corrosive substances will also lead to rapid ageing; in addition, if the sealing cable itself is of poor quality and there are defects in raw materials and production processes, the durability will also be greatly reduced.
III. Installation issues
1. Q: When installing the sealing wire, it always fails to fit in. Do you have any tips?
A: Before installation, clean up the dust and debris in the card slot of the charging port to ensure that the card slot is clean; you can apply a small amount of alcohol or soapy water (lubricating and easy to evaporate) on the sealing wire, and then carefully embed the sealing wire slowly along the edge of the card slot to avoid distortion; if it is difficult to install at the bend or corner, you can use tweezers. Sub and other small tools to assist.
2. Q: The sealing wire is easy to fall out after installation. What should I do?
A: It may be that the friction between the sealing line and the card slot is not enough. Try to replace the sealing wire with a slightly thicker specification to increase the tightness with the card slot; if the card slot is worn and wide, you can apply a small amount of glue suitable for electronic products in the card slot (such as shadowless glue, be applied carefully to avoid flowing into the charging port), fix the sealing wire, but make sure that the electronic products have been cut off before operation.
IV. Compatibility issues
1. Q: Can the sealing cable be used for charging ports and electronic products of different brands?
A: In most cases, it is not universal. There are differences in the size, shape and card slot specifications of charging ports of different brands of electronic products, and the corresponding sealing cable specifications are also different. When purchasing, you need to choose the appropriate sealing line according to the specific product model to ensure good sealing effect.
2. Q: How to ensure compatibility with the equipment when purchasing a third-party sealing cable?
A: Before purchasing, carefully check the product description to confirm the equipment model applicable to the sealing line; you can also consult the merchant, provide detailed information of the equipment, and ask whether it is suitable; you can also refer to other user evaluations to understand the compatibility in actual use.
V. Cleaning and maintenance issues
1. Q: How to clean the dirty sealing wire? Will it affect the sealing effect?
A: Use a clean soft brush (such as a toothbrush), dip a small amount of alcohol or water, gently brush off the stains on the sealing line, and then dry it with a dry cloth. As long as the operation is gentle when cleaning and does not damage the sealing line, it will not affect the sealing effect. However, if hard brushes or corrosive cleaners are used, it may cause the surface of the sealing line to wear and age, which will destroy the sealing performance.
2. Q: How do I need to maintain the charging port sealing cable at ordinary times?
A: Minimise the number of unnecessary plugs and unplugs of the charging cable, avoid excessive bending and pulling of the sealing cable; avoid the contact of electronic products with high temperature, high humidity and corrosive environments; regularly check whether the sealing cable has signs of displacement, wear and ageing, and deal with problems in time.
